4/01/2013


Galaxy S Duos S7562 : Upgrade to XXAMC1 ICS 4.0.4 Official Firmware


if you are the owner of Samsung Galaxy S Duos S7562 and waiting for official upgrade then I have a good news for you. Now you can upgrade your Galaxy S Duos S7562 to Android  XXAMC1 ICS 4.0.4 official firmware. This upgrade will fix all minor bugs which covers Wi-fi and network issues. So follow the given instruction and upgrade your Samsung Galaxy S Duos S7562 and enjoy with new official firmware.
Galaxy S Duos S7562 300x258 Galaxy S Duos S7562 : Upgrade to XXAMC1 ICS 4.0.4 Official Firmware
Important Note: This Firmware is taken from a very reliable developer from XDA Forum and is completely safe to install on your device.Yet we would adivce you to go for this upgrade at your own risk as neither this site nor the author can be held responsible for any problem in upgradation such as bricking of Device. However, this happens only in rare cases.Also you would lose warranty of the hardware(if any) after upgrade.
To make it easier for Samsung Galaxy S Duos S7562 users, the entire upgradation process has been divided into two easy to understand parts:
         Pre-Upgardation Steps.
  • Final Upgradation Steps.
Please follow all the steps with extra care and don’t miss even a single step.

Pre-Upgradation Steps for Galaxy S Duos S7562

  • First of all make sure that your device is Samsung Galaxy S Duos S7562.(Check at Settings> About Phone). Don’t try to run this upgrade on any other version.
  • Also, this upgrade can only be executed on unlocked boot loader devices.
  • We would advice the users to first take a complete backup of the existing ROM by using Nandroid Backup and Restore App.
  • Important data such as SMS, Contacts etc.can also be backed-up on PC or any other device .
  • Also make sure that your Galaxy S Duos S7562 is at-least 55% charged as the upgrade will be done on the battery power.
  • Next, we would recommend to disable all the anti-virus(if any) which are running on your Device. Also uninstall the Kies package from the computer which will be used to upgrade.
  • Now th important step,enable USB Debugging on your cellphone (The option available at Settings > Applications > Development > USB debugging ).
  • With this, your Galaxy S Duos S7562 is now ready for upgradation to Upgrade to XXAMC1 ICS 4.0.4  Official Firmware.

Final Upgradation for Galaxy S Duos S7562

  • First of all, download the Galaxy S Duos S7562 ICS 4.0.4 Firmware Package and odin on your Laptop/PC.
  • odin3 screenshot android upgrade Galaxy S Duos S7562 : Upgrade to XXAMC1 ICS 4.0.4 Official Firmware
  • After the download is done, transfer the Zipped folder to the SD card using USB cable.
  • Now disconnect you device from PC/Laptop and turn it off (so that it can be started into recovery mode).
  • Now Press Volume Up button + the Home key button (the middle button). Keeping holding them and switch on your Mobile using Power Key.
  • Your device will now boot in recovery mode. If it is not, try repeating the above steps.
  • Now in the recovery mode, Select “Wipe data/factory reset” >> “Wipe Cache partition”.
  • Then select “install zip from sd card” >> “choose zip from internal sd card”.
  • Then select the zipped folder you’ve downloaded and your Phone will start upgrading.
  • After the upgrade is completed, just restart your cellphone.
With this, you’ve successfully upgraded to  Upgrade to XXAMC1 ICS 4.0.4  Official Firmware. Enjoy your cellphone with more efficiency. If you face any issues during upgradation, feel free to ask us in the forn of comments below.
Filed in: Samsung
Tagged with: 
Posted by at No comments:

Update Galaxy Y Duos S6102 with Official ICS Android 4.0.4 DDMC1 Firmware



Galaxy ACE DUOS LogoSamsung Galaxy Y Duos S6102 users can now upgrade the firmware of their phones with the latest ICS Android 4.0.4 firmware version. This firmware is officially released by Samsung Electronics and is dubbed as ICS DDMC1 version which fixes the over-heating issue along with some bugs in camera. Samsung has dubbed this update as Value pack update which brings in the value for consumers with new minor tweaks in user interface. Fortunately, this will be the last update of ICS. Unfortunately, there won’t be any Jellybean upgrade for the device. But not to worry as in coming days we will also be coming out with the detailed tutorial on how to root the device and install the custom ROM firmwares of Jellybean 4.2.2 in your Galaxy Y Duos S6102.

Note: Applying this update won’t root / void the warranty of the device in any manner. Also, if your device is currently in custom ROM firmware, after applying with this update, the warranty can be reclaimed.
Quick Pre Requisites:
  • All the data in your Galaxy Y Duos S6102 should be backed up with the help of below mentioned steps manually and not with the KIES or ROM Manager.
SMS – Use “SMS Backup & Restore app”,
Contacts – Sync with the Gmail application,
Call Log - Call Log and Restore
Images, Songs, Videos, Files – Copy to internal / External SD Card,
APN and MMS Settings – Note down from the path “Applications > Settings > Wireless and Network > Mobile Networks > Access Point Names”
  • Minimum battery charge left in your device should be a minimum of 50% so as to make sure that the device doesn’t get turned Off in the middle of firmware update. Also, you will need to enable the USB Debugging Mode in your computer from the path “Settings > Applications > Development > USB debugging”.
  • Just in case if you are on any of the custom ROM firmwares, then you will have to clear the cache from the recovery mode and then proceed to the further step. You can enter the device in the recovery mode and select the options of “Wipe Data / Factory Reset” and “Clear Cache”.
  • Recovery mode in Galaxy Y Duos S6102 can be entered by first turning Off the phone and then hold the Volume Up button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
Let’s proceed to the NEXT PAGE where we have mentioned a detailed guide on how to apply this firmware update.
Guide to Update Galaxy Y Duos S6102 with Official ICS Android 4.0.4 DDMC1 Firmware:
  • Open Odin in your computer and Turn Off your phone so that it can be entered in the Download Mode. The Galaxy Y Duos S6102 can be entered into the Download mode by holding the Volume Down button + the Home key button (the middle button). While holding these both buttons, you need to switch ON your device.
  • Connect your phone to the computer with the help of original USB cable and then you will see that the ID : COM section will turn Yellow indicating that all the drivers are installed successfully.
  • Click on “PDA” and select the tar file which you got after the extraction of firmware zip package and click on “Start” to start the process of firmware update. As soon as the firmware is updated successfully, the device will be rebooted automatically indicating that all the drivers are installed successfully.
  • Please note that the whole process of firmware update may take around 4 -5 minutes. Just in case if it takes more than 8 – 10 minutes, you need to re insert the battery and retry the whole process.
Note: If the device gets into the boot loop sequence or say gets stuck in the welcome screen, just re insert the battery and re follow the above instructions so as to again follow the above mentioned instructions.

Posted by at No comments:

Sony Xperia U : Upgrade to King’s Rom X-Clean ICS



Sony Xperia U is yet another awesome Android powered Smartphone from Sony. It comes with features such as 8Megapixel Camera, LED-backlit LCD, capacitive touchscreen, 16M colors and generally comes with Android OS, v2.3 (Gingerbread). The upgrade to ICS has been announced by the company in some places around the Globe but it is yet not available at most locations so we’ve brought yet another step by step tutorial to upgrade it to King’s Rom X-Clean ICS.
xperiauj 1024x604 Sony Xperia U : Upgrade to Kings Rom X Clean ICS

Note: This works for both Sony Xperia U and Sony Xperia U

Important Note: This Firmware is taken from a very reliable developer from XDA Forum and is completely safe to install on your device.Yet we would adivce you to go for this upgrade at your own risk as neither this site nor the author can be held responsible for any problem in upgradation such as bricking of Device. However, this happens only in rare cases.Also you would lose warranty of the hardware(if any) after upgrade.
To make it easier for Sony Xperia U users, the entire upgradation process has been divided into two easy to understand parts:

l Upgradation Steps.
Please follow all the steps with extra care and donot miss even a single step.

Pre-Upgradation Steps for Sony Xperia U

  • First of all make sure that your device is Sony Xperia U.(Check at Settings> About Phone). Don’t try to run this upgrade on any other version.
  • Also, this upgrade can only be executed on unlocked boot loader devices.
  • We would advice the users to first take a complete backup of the existing ROM by using Nandroid Backup and Restore App.
  • Important data such as SMS, Contacts etc.can also be backed-up on PC or any other device .
  • Also make sure that your SONY Xperia U is at-least 55% charged as the upgrade will be done on the battery power.
  • Next, we would recommend to disable all the anti-virus(if any) which are running on your Device. Also uninstall the Kies package from the computer which will be used to upgrade.
  • Now th important step,enable USB Debugging on your cellphone (The option available at Settings > Applications > Development > USB debugging ).galaxy s3 usb debugging Sony Xperia U : Upgrade to Kings Rom X Clean ICS
  • With this, your SONY Xperia U is now ready for upgradation to 7.0.A.3.195 Custom Firmware.

Final Upgradation

  • First of all, download the  Update Package on your Laptop/PC.
  • After the download is done, transfer the Zipped folder to the SD card of SONY Xperia U using USB cable.
  • Now disconnect your SONY Xperia U from PC/Laptop and turn it off (so that it can be started into recovery mode).
  • Now Press Volume Up button + the Home key button (the middle button). Keeping holding them and switch on your Mobile using Power Key.
  • Your device will now boot in recovery mode. If it is not, try repeating the above steps.
  • Now in the recovery mode, Select “Wipe data/factory reset” >> “Wipe Cache partition”.
  • Then select “install zip from SD card” >> “choose zip from internal SD card”.
  • Then select the zipped folder you’ve downloaded and your Phone will start upgrading.
  • After the upgrade is completed, just restart your cellphone.
With this, you’ve successfully upgraded to King’s Rom X-Clean ICS Custom Firmware. Enjoy your Sony Xperia U with more efficiency. If you face any issues during upgradation, feel free to ask us in the form of comments below.

Enjoy the rom 
Posted by at No comments:

Update Sony Xperia U with SGS3 based 4.1 Jelly Bean Dynamic Custom ROM

Xperia-U
Thanks to those of xda-developers (who had made all this possible) you can now update your Sony Xperia U with the Samsung Galaxy S3 looks and features as the latest version of the Dynamic custom ROM firmware has been made available for your smartphone. Therefore, during the following step by step guide we will be checking in how to apply the Jelly Bean Dynamic OS update on the Xperia U, the tutorial being easy to complete as the installation procedure is not a complex one. But, more aspects about the same are being detailed below.
The present update isn’t an official firmware released by Sony for your Xperia U, so that makes the Dynamic software a custom ROM. Unfortunately there are no info about a possible Jelly Bean OTA upgrade therefore flashing this SGS3 based firmware might be the perfect solution for those who want to bring the Android 4.1 experience on their Xperia U smartphones. The ROM comes with important features and with the S3 style; once applied, you will notice that your phone has gained more speed, the appearances and the looks were improved, the battery life upgraded and much more.
You can take a more appropriate look over the Galaxy S3 based Jelly Bean Dynamic custom ROM enhancements by checking the image from below, where I have mentioned some of its most relevant features and capabilities. Remember that the update was developed and tested on the Sony Xperia U by those of xda, so we have them to thanks for the present guide. Now, let’s see what is with this ROM:Xperia U Dynamic ROM Features
Xperia U Dynamic ROM Features
As mentioned in the introduction, the installation procedure is not a complex one, but only if your Xperia U has been previously prepared. If not, you must complete the next pre requisites. Anyway, you can skip the next section only if the tasks mentioned in the list were performed already. It’s extremely important to take care of the pre requisites, or else you will not be able to flash the Jelly Bean Dynamic ROM on your handset. The first to start with is the backup which must be first ensured. You have backup tips mentioned below, along with the rest of the preparation operations, so go and apply the same.
  • You should begin by backing up the current ROM. In case the new one doesn’t work you can easily restore the stock or the previous platform. This can be performed only if a custom recovery image is being installed on your device.
  • Then, you can backup the text messages by downloading SMS backup and restore apps for Android.
  • The call logs can also be saved by downloading suitable backup and restore tools from Google Play.
  • If you need to backup the contacts, then you have to sync with your Gmail account.
  • The Internet settings can be saved as well.
  • A computer or SD card can be used for saving images or videos.
  • Once the backup is ended, you should root the Xperia U and unlock its bootloader. Be aware as by performing these operations, the warranty will get void. You can restore it though but only by downgrading to the stock ROM (this is why you need to back it up first) or by updating with an official software released by Sony and suitable with your handset.
  • Next, you need to install a custom recovery image, like CWM recovery, on your phone. This tool will be used on the flashing and wiping (this is why you have to backup the data) processes.
  • Make sure you can use a Windows running computer, your device and its USB cable.
  • On the computer and Xperia U you must deactivate the Firewall, antivirus and security programs protection.
  • The handset must be charged, or at least 60% power should be left in the system.
  • On the smartphone enable the USB debugging option; go to “Settings -> Applications -> Development -> USB debugging”.
  • Finally, do not apply this step by step guide for a similar device with the Sony Xperia U as the SGS3 based Jelly Bean Dynamic custom ROM firmware will work only for the mentioned smartphone; else you will risk in bricking your Android powered device.

How to Update Xperia U with SGS3 based Jelly Bean Dynamic Custom ROM

  1. On the first step you need to download the update file.
  2. Place the file on your computer.
  3. The download link is here.
  4. Then, you need to connect the U with the PC via its USB cable.
  5. Next, take (select and then copy-paste) the update file from the computer and place it to your phone SD card.
  6. Disconnect the device from the PC.
  7. Turn the phone off.
  8. Reboot in recovery mode.
  9. The first thing you must perform from the recovery mode is the wipe; therefore select “wipe data factory reset” and “wipe cache partition”.
  10. Then, return to the main menu (“+++go back+++”).
  11. And select “install zip from SD card” and “choose zip from SD card”.
  12. You can now pick the update file and install the same.
  13. When the flash operation is ended, select “+++go back+++” to return and “reboot system now” to finish.
So, now you finally learned how to update your Sony Xperia U with the SGS3 Jelly Bean based Dynamic custom ROM features. You can start enjoying the Android 4.1 experience along with the Galaxy S3 looks and features on your own Xperia U. Share your impressions and thoughts with us by using the comments area. Also, do tell us if something wrong happened while trying to flash the firmware.
Posted by at No comments:

ROM][GT-S5300] ELASYS ROM For Samsung Galaxy Pocket


  


  

Features :
  • 20 Toggles on Statusbar
  • Full Customize Statusbar
  • Mod Elasys labs
  • Swipe to remove Notification
  • OTA Updater
  • Tab on Statusbar
  • Customize Carier Icon
  • Internet Speed Meter
  • Shortcut app on notif
  • New Statusbar Expanded
  • DCSMS Weather
  • Analog Clock on statusbar
  • New Calendar Style on statusbar
  • 4 Layout Settings
  • Support Arabic RTL
  • Mod About elasys
  • Find out by yourself

DOWNLOAD

Don’t mirror link or make a link shortener without ask permissions to me !!!

INSTALLATION GUIDE : 
  • Copy Elasys_rom_v1.zip to internal memory (SDCARD)
  • Go to recovery mode (Vol-up + Home + Power)
  • Choose apply Update from SD card
  • Select CWM for pocket (You can use vM00CWM.zip file, credit for vM00)
  • Install zip from SD card
  • Choose Elasys_rom_v1.zip & install
  • Please wait until the installation is complete
  • Reboot
  • Done

NOTE
  • You must REFLASH YOUR FIRMWARE VIA ODIN, ROOT, and DEODEX your rom before flash the rom.
  • After deodex you can flash Elasys ROM Ver.1
  • Don't ever do WIPE DATA/FACTORY RESET after installing Elasys ROM Ver.1
  • Don't Forget to Backup your Rom first, to avoid something undesirable
  • If the text size is too big, resize on settings -> elasys labs.
  • When changing app icon shortcut no need to reboot, but just click update on the statusbar.
  • Do not remove the status bar greper, so that slider brightness can work.
  • ALL MOD is in Elasys MultiLABS.
  • GIVE CREDIT if you use/change something from this custom rom to rom/theme that your modification, as a form of respect to dev2 who I credits !!!!
  • Do With Your Own Risk

CREDITS : 
  



>>>>> ELASYS V2 <<<<<

Screenshots
  

  

Features :
  1. Pre-Rooted
  2. Pre-Deodexed
  3. Zipalign
  4. New UI and animations
  5. Random bootanimation and sound
  6. New statusbar with full customize
  7. 29 Toggles in Statusbar expanded
  8. Slider Brightness on statusbar expanded
  9. 8 Extended Power Menu
  10. Mod elasys labs
  11. 3 windows on statusbar expanded
  12. More language options
  13. Add some apps
  14. 4 skins mms.apk
  15. Support RTL Arabic
  16. OTA Updater
  17. And many more....


DOWNLOAD
Don’t mirror link or make a link shortener without ask permissions to me !!!

INSTALLATION GUIDE : 
  1. Turn off your phone
  2. Go to CWM
  3. Wipe Data & Wipe Cache
  4. Go to Instal Zip From SDCARD
  5. Choose Elasys_ROM_V2.zip
  6. AROMA installer windows will be appear.
  7. Follow the instructions
  8. Choose Install Rhiskey Kernel (for example) and install.
  9. After finish, go to Advanced -> Reboot Recovery.
  10. Go to Instal Zip From SDCARD
  11. Choose Elasys_ROM_V2.zip again
  12. Choose Install Elasys V2.
  13. Wipe Data & Wipe Cache
  14. Go to Advanced
  15. Wipe Battery Stats.
  16. Reboot


Credits and Thanks to :
  
Allah SWT
Amarullz for the Installer
#Dev Elasys
- Baca yang bener a.k.a Ipul d'Clev
- Rhiski Aprilianto a.k.a riskey
- Vian Agen AntiTerror
- Andik DiaryDepresiku
- Irfan Sc
- Fadil's
#Dev Regina
- Fikri Muhaffizh Imani
- Anton Sang Interisti a.k.a A_A_P_07
#Dev Wintermod Evo :
- Aory utamie
- Ricky Outsider
- jmkl six
- Rata bila bagi
- Muhammad jadi suito
- Firman kuraps
#Dev JellyMod :
- Teguh Setiawan
- Narindra i'bay
- Syam
- AdHe DaifuLlah MuHsin
#Dev Repencis :
- Fedy kusuma
- Heri Setiawan
#Dev Sabotage :
- Arif setiawan
#Script Tweak :
- Hellow Mega
#Velocity Tweaks
- Ne.xt
DroidFolks @ xda
serajr @ xda
kahvitahra @ xda
Irfanbagus @ xda
All developers at xda forums
Randri Black Lee
Muhammad Alfiyan Syamsuddin
All Developers at XDA Developers forum
Mastah2 GalYoung
Mastah2 Galpock
Mastah2 Galmin, Galmin 2
Galaxy Pocket FB Community
Temporary Grup GalYoung
Official Galaxy Mini
Official Galaxy Mini 2
Art Corner of Galaxy young Art Corner of Galacy mini
Posted by at No comments:

Samsung Official 4.2.1 Leaked ROM + Root for Galaxy S3 GT-i9300!



Download this video for viewing in HD on your smartphone or computer.
Click Here to Download High-Quality HD video to your Smartphone or Computer.
This video was brought to you by AndroidRoot.org. Click Here to See at AndroidRoot.org
Samsung’s official 4.2.1 “leaked” ROM is out in the wild and you can grab a copy of the leaked firmware and flash with ODIN and also there’s a rooted version with custom recovery for those of you already rooted on the Galaxy S3 GT-i9300.
What’s new with Android 4.2.1 TouchWiz?
Well, you can expect some of the newer Android 4.2.1 features on it like lockscreen widgets and quick toggles (swipe from top to bottom with 2 fingers for quick access). If you’ve tried some of the latest Android 4.2.1/4.2.2 AOSP ROMs, you know what to expect. Photosphere is still missing in action though but don’t fret too much as this isn’t a final version just a “leak”.
If you can’t wait for the official 4.2.1 to be released or just want to take a peek at what Sammy’s been working on, flash the rooted version or even the completely stock tar.md5 via ODIN and let me know if you find any other new features.
Download:
Download TugaPower ROM (leaked Android 4.2.1 + Root + Custom CWM Recovery)
or
Download leaked official Android 4.2.1 ROM (flash in ODIN, no root or custom CWM!)
Credits – TugaPower
Need Help? Follow/add me on Google+, Facebook, or Twitter!
GooglePlus
Facebook
Twitter
Want to stay updated on latest Galaxy S3 Root news?
Sign up for our Galaxy S3 Root Newsletter here so you don't miss a single tip and get personal help via e-mail!
Galaxy S3 Reference
You will need a rooted Galaxy S3 to install all ROM/kernels.
NOTE: PLEASE ONLY INSTALL ROMS INTENDED FOR YOUR VERSION OF GALAXY S3! Otherwise you WILL BRICK YOUR PHONE and I will not be responsible!
How to Root international Galaxy S3 GT-i9300!
How to Root U.S./Canadian Galaxy S3!

First time to rooting and custom ROMs? Please see our Galaxy S3 Root FAQ FIRST!
Galaxy S3 ROMs
Galaxy S3 GT-i9300 ROMs
T-Mobile Galaxy S3 SGH-T999 ROMs
AT&T Galaxy S3 SGH-I747 ROMs
Sprint Galaxy S3 SPH-L710 ROMs
Note: T-Mobile Galaxy S3 ROMs are compatible with Canadian Wind, Mobilicity, and Videotron Galaxy S3s.
AT&T Galaxy S3 ROMs are compatible with Canadian Bell, Telus, and Sasktel Galaxy S3s.
Posted by at No comments:
Subscribe to: Posts (Atom)